How to Set Up a Retractable Banner Stand


Retractable banner stands are lightweight, easy to transport and to set up which makes them great for trade shows. But how do you set them up? Follow our step-by-step instruction in order to properly install your retractable banner stand. 

Your retractable banner stand will arrive in pieces:

  1. The base that your graphic will attach to and “retract” into when storing
  2. The top bar that holds the top of your artwork
  3. The pole, which holds your graphic in a vertical position
  4. Custom printed vinyl banner
  5. Carrying case

Installation

Step 1:  Place the base on the ground. Before connecting your support pole, you should make sure to give the base of your retractable banner stand the correct support before going further into the assembly process.

Step 2: Connect support pole and place it in a slot of the stand found at the top of the base. Before pulling the banner up from the base of the stand, whatever support pole your retractable banner comes with, place that into the base and set it up.

Step 3: Gently lift the header bar. With your base properly secured and the support pole set up, you can now pull up your banner slowly from the base. Don’t pull the banner out of the base too fast to damage the track or the poster. 

Step 4: When you finish pulling the banner to the assigned height, hook the top header bar into the slot at the end of the pole. Make sure the poster is securely attached to the pole and and does not appear loose.

0 comments

  • There are no comments yet. Be the first one to post a comment on this article!

Leave a comment

Please note, comments must be approved before they are published