Did you know that you can take stickers off your laptop without damaging it?
So, you fancied the idea of making your system look attractive and decided to get a sticky label. Later, you thought it too childish. Then you resolved to take it off only to be greeted by another surprise; ‘gummy leftovers’ from your labels. Don’t be surprised. It happens to a lot of people.
In another case, if you buy a laptop and there is a sticker attached to it, you should consider if the label is for a warranty seal, serial number, or a license key. It is because these things are important, and losing them might make it difficult for you to get your PC serviced. Nevertheless, if you have decided to get rid of the sticky labels, make sure to avoid using harsh methods on your PC.
How to Get Stickers Off Your PC
Peeling off stickers is not as easy as applying one because you can't take it off. While it might also be easy for some people, others need to be cautious when removing a sticky adhesive. If you want to get rid of the signs on your personal computer, there are several ways you can do this. However, these methods differ according to the PC you are using
, such as a laptop and a MacBook.
Here, we shall be looking at ways to get the sticky label of your laptops. You have to make sure that you properly follow the directions to make the process of peeling easy.
1. Oil-Based Elements
Substances that have oil in them have been tested and prove to work well for getting rid of and loosening sticky labels from your PC. They make it easier for peeling and scraping out gummy signs. These elements include olive oil, petroleum jelly, tea tree oil, mineral oil, and properties that have moisturizing qualities.
Spread a small amount of oil with a clean cloth on the design and leave for five minutes to soak. This method is excellent for uncoated stickers but takes time for labels that are waterproof or have plastic coatings because the oil will only be able to move under the edges.
For waterproof or plastic coatings, leave enough grease on the decal for some minutes and allow it to get under your design. After this, take a plastic sticker and peel or scrape off the label. Then, immediately wipe the area with a clean cloth or rag to take away the residuals of adhesive and lube. It is because exposing it for a long time may damage or discolor the surface.
- Avoid applying in the ports and gaps of the PC.
2. Mild Abrasives
In a situation when you do not have any solvent in your house, using a mild abrasive is advisable because it wears them away. Examples of mild abrasives are toothpaste, magic erasers, Scotch Brite pads, or baking soda paste. Abrasives work fine on new stickers as the gum is not that hard. They can also scrape the exterior of metal-cased laptops.
- Make sure to keep a microfiber cloth when you use mild abrasives to remove labels.
- Avoid using a harsh abrasive as it will damage the underlying surface mostly when they make your laptop from plastic materials.
3. Hair Dryers or Heat Guns
This method is the easiest and neatest way to get stickers away from your laptop. When you use a heat gun or dryer, the glue loses up itself and makes it easy for you to pull it off immediately. Use a heat gun or hairdryer that is on low setting and point it directly at your sticker for thirty to forty-five seconds.
A hairdryer or heat gun can remove all types of stickers, even the ones that are stubborn. If the sticker refuses to loosen up, try getting under the edge with a plastic scraper, credit card, or fingernail and try lifting it off. After you remove the label, clean the surface with a wet microfiber cloth and leave it to dry.
- Make sure that you do not focus the heat on a precise spot and moving it on the edges of the sticker.
- Always put off the hairdryer or heat gun if the heat gets uncomfortable or too much. It is because too much heat can cause damage to your PC.
To remove your sticky labels from your PC, you can also make use of some solvents without leaving any glue on your system. These solvents are mostly oil-based, for example, Goo Gone, lighter Fluid, Mineral Spirits, and WD-40. They can dissolve the glue from the labels, which makes it lose and easy to peel away.
On the other hand, non-oil-based solvents can get rid of stickers on your PC slightly but not in all cases. Non-lubricant solvents that can take away sticky labels include vinegar, rubbing alcohol, acetone, and Windex.
To use this substance, first, take a ball of cotton wool or a clean cloth, dip in the solution, and spread on the edges of the label. After this, let it dry for a few minutes before cleaning the decal. Then, take a clean piece of lint-free cloth or a damp cloth to take out the remaining residual to avoid stickiness.
- Make sure to put on gloves while observing this process. It helps to protect against skin allergies and irritations.
- Avoid pouring the solution on the surface of your sticky label because it can enter your PC, and this might cause damage to it.
Stickers on MacBook’s
MacBook's are made from metal. Removing tickers on MacBook is quite different from that of a laptop. Apple, which is the manufacturer of MacBook, urges against using abrasives and solvents on their products, most especially to get rid of labels. They also advise against using any form of liquids or paper towels. Many people wonder why. But the reason has been that It results in damaging or scratching the exterior of the MacBook.
Apple suggests that before washing before you remove labels from your MacBook, make sure you shut the device down and take away the charging adapter from the wall outlet before cleaning.
Use a soft wet lint-free cloth or a slightly damp non-abrasive rag and gently scrub your labels. It will allow them to peel off easily. Try using your fingernails, plastic scraper, or the edge of a credit card to remove it. Once you get rid of the sticker, take a dry cloth and wipe off the residue.
However, these methods might not work well for your MacBook. Hence you can try applying minimum heat to your sticker so as not to damage the device.
- Ensure that you use protective glasses and gloves when getting rid of labels. It will enable you to complete the task without getting harmed and keep you safe while scratching off the label.
How to Remove Sticker Residue from Laptop
In many cases, you might be able to remove stickers without their adhesive sticking to the PC. But, other times, the glues refuse to go away and make it look inadequate. Well, there are so many tested methods and means that you can use to get rid of the goo and your PC.
1. Petroleum Jelly
Just like a lube, the petroleum jelly, when applied to the goo, makes it soft and easy to pull out. Just add a little amount of petroleum jelly on the spot and let it sit for a few minutes. After this, use a damp cloth and clean off excess jelly from the PC.
- If you cannot get petroleum jelly, try using a lotion or baby oil.
The work of the toothpaste is mainly to clean the teeth. But, just like the way it works for the teeth, it can also wipe out the goo stains. Just spread a little amount of toothpaste on the spot, rub it with a lint-free cloth, then use a wet cloth to clean out the spot and excess toothpaste.
Vinegar is a sour liquid gotten from fermenting alcohol. It works well for removing sticky labels. Dampen a dishrag in vinegar, place it on the gluey part and leave it to soften the goo. After some minutes, use a clean paper to wipe the spot.
- You can also use vinegar to clean your home.
4. Rubbing Alcohol
Rubbing alcohol is for removing sticker residues from your personal computer especially those with plastic and metal surfaces. Dip a ball of cotton wool in rubbing alcohol and rub it gently on the spot. Then, wipe the surface with a dry lint-free cloth, and your PC will look new.
- If you do not have alcohol at your disposal, try using vodka, it has the same effect.
5. Nail Polish Remover
It is also a form of alcohol. It is alcohol-based water that helps to dissolve the glues from your sticky labels. Wet a clean cloth, rag, or paper towel in alcohol, then rub it on the g to geo to get the adhesive out.
Windex is a substance that works well in removing the goo from different surfaces, including glass. Spew a small amount of Windex on the goo, rub with a lint-free cloth or a rag and ensure that you protect the ports of your laptop from this substance.
The main work of a WD-40 is to remove decal adhesives on an item or object, especially your personal computer. It is a lubricant that is inexpensive, easy to obtain. Spray the lube on the spot, then leave it to soften. After this, use a clean cloth to wipe the spot. It will help to remove excess liquid.
- Apart from this lube, other lubricants do not apply.
8. Rubber Erasers
When you use a rubber eraser to remove the goo on your PC, they hold the adhesive and roll the remainder away from your personal computer. It will also allow ease of scraping.
- Rubber erasers do not work well for errant pencil stains.
- They also do not go well for all surfaces. Before you use a rubber eraser, check it to know if it will work on the object you want to clean.
9. Peanut Butter
It is a spread made from ground peanut and is rich in fat. This fat helps to melt away gummy leftovers from your personal computer. Smear a little amount of peanut butter on the area and let it soften. Then, wipe with a dry, clean, lint-free cloth.
10. Cooking Oil
Cooking oils such as olive oil, coconut oil, or vegetable oil are remedies for a sticky situation. Use your fingers paper and dab it in your cooking oil. Then, wait for five to seven minutes before you scrape the gum with a plastic scraper.
- Make sure to test the oil in any other place before applying it to your object because it might stain the item.
- Do not forget to wipe too much oil from the PC.
11. Goo Gone
It is a product that they make with the sole purpose of removing goo from your PC. It works effectively and is one easy method or way of cleaning and wiping out adhesives.
The heat from a hairdryer melts away the sticky leftover from its area and makes it easier to remove the sticker from any surface, whether plastic, glass, or metal. Put on the hairdryer, heat the goo with a hairdryer for thirty seconds, and use a damp cloth to wipe the spot.
- When using the hairdryer, make sure that the heat is not too much as it will damage the laptop.
Apart from these ways, different persons have advocated the use of solvents such as isopropyl alcohol for getting rid of sticker residues. Other equipment you can use include: hairspray, baking soda paste, lighter fluid, kerosene, duct tape, rubber cement thinner, paint thinner, margarine, cooking spray, perfume, tea tree oil, furniture polish, mayonnaise, aftershave, and eucalyptus oil. But in all these cases, make sure to clean with a lint-free cloth before attempting these methods.
How to Remove Sticky Residue from Plastic
Plastic is usually any solid but flexible substance. It is a material that many people use to produce different objects, especially your laptop and MacBook. Removing stickers from plastic has been a constant phenomenon people face. Although it might look and sound easy when you hear or see a sticker, and you want to remove it.
Taking off labels from your PC must be done practically and efficiently because not doing so might cause damage to your system. If you want to get rid of plastic decals, you need to practice and know the right things to do. There are many ways to remove sticky leftovers from plastic. However, we shall focus on five significant methods.
1. Massage Adhesive with Your Thumb
Check to know if the adhesive is not a water-soluble glue. If it is not, using your thumb, slowly rub the leftover paste and roll the gum into small balls. It works for stubborn adhesives. However, if your glue is water-soluble, it will not work well.
2. Use Warm Paper Towels
When using this method, soak a clean rag in warm water and fold the towels into different layers. Place the wet rag on the adhesive remains and let it rest for some minutes. It helps the glue to go off.
3. Scrape the Goo
To do this, test your rubber knife to know if it will work in the area. Then, try scratching the sticky spot with your nails or rubber blade.
4. Apply Pressure
Dampen a clean towel in warm water, scrub the leftover glue, and apply moderate pressure. Then, clean the spot with another wet cloth and let it dry.
5. lube It Up
lubricants will penetrate the sticky spot and soften it up. So, spray it on the area, scrub the gum with a damp cloth, and after leaving it to dry.